November 28, 2018

ELD Integration | Trimble

Topic:

How to Import Trimble ELD Data Into RapidLog.

Trimble:

Arguments:
- /provider (Trimble)
- /companycode (RLCompany Code)
- /apikey (Trimble API Key)
- /from (defaults to now – 1 day. 89 days back maximum. YYYY-MM-DD format)
- /daysback (defaults to 1)
Advanced Arguments:
- /debug 1
  - /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
- /ui 1
  - /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
- /fm 1
  - /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
- /pause 1
  - /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.
C:\Windows\RL5.ini Settings (optional):
- [Directories]
  EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
- Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode
Example BAT File for All Companies and Providers (prefered method):
- “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI
Example BAT File for a Single Company and Provider:
- “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider Trimble /companycode MYRLCOMPANY /apikey TrimbleAPIkey /daysback 8
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
- Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
Open Notepad and setup the download, import and audit. Save that file as a .bat file.
Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | Teletrac Navman

Topic:

How to Import Teletrac Navman ELD Data Into RapidLog.

Teletrac Navman:

Arguments:
- /provider (Teletrac_Navman)
- /companycode (RLCompany Code)
- /username (Teletrac_Navman Username)
- /password (Teletrac_Navman Password)
- /daysback (defaults to 1)
- /from (defaults to now – 1 day. Date format yyyy-mm-dd )
Advanced Arguments:
- /debug 1
  - /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
- /ui 1
  - /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
- /fm 1
  - /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
- /pause 1
  - /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.
C:\Windows\RL5.ini Settings (optional):
- [Directories]
  EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
- Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode
Example BAT File for All Companies and Providers (prefered method):
- “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI
Example BAT File for a Single Company and Provider:
- “C:\Program Files (x86)\RapidLog\EOBRDownloader.exe” /provider Teletrac_Navman /companycode MYRLCOMPANY /username Teletrac_NavmanUsername /password Teletrac_NavmanPass /daysback 8
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
- Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
Open Notepad and setup the download, import and audit. Save that file as a .bat file.
Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | Teletrac Fleet Director

Topic:

How to Import Teletrac Fleet Director ELD Data Into RapidLog.

Teletrac Fleet Director:

Arguments:
- /provider (Teletrac_FleetDirector)
- /companycode (RLCompany Code)
- /accountid (Teletrac_FleetDirector Account ID)
- /username (Teletrac_FleetDirector Username)
- /password (Teletrac_FleetDirector Password)
- /daysback (defaults to 1)
- /from (only use when pulling a specific date range – 2 week max)
- /to (only use when pulling a specific date range – 2 week max)
Advanced Arguments:
- /debug 1
  - /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
- /ui 1
  - /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
- /fm 1
  - /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
- /pause 1
  - /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.
C:\Windows\RL5.ini Settings (optional):
- [Directories]
  EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
- Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode
Example BAT File for All Companies and Providers (prefered method):
- “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI
Example BAT File for a Single Company and Provider:
- “C:\Program Files (x86)\RapidLog\EOBRDownloader.exe” /provider Teletrac_FleetDirector /companycode MYRLCOMPANY /accountid Teletrac_FleetDirectorAccountid /username Teletrac_FleetDirectorUsername /password Teletrac_FleetDirectorPass /daysback 14
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
- Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
Open Notepad and setup the download, import and audit. Save that file as a .bat file.
Open Task Scheduler and schedule the .bat file to run once or twice daily.

ELD Integration | GeoSpace

Topic:

How to Import GeoSpace ELD Data Into RapidLog.

GeoSpace:

Arguments:
- /provider (GeoSpace)
- /companycode (RLCompany Code)
- /apikey (GeoSpace API Key)
- /from (defaults to now – 1 day. 89 days back maximum. YYYY-MM-DD format)
- /daysback (defaults to 1)
Advanced Arguments:
- /debug 1
  - /debug 1 enables the debug files to be saved during the download. The debug files are saved in a set of directories under the folder the EobrDownloader.exe file is running in. \HOSDebug\
- /ui 1
  - /ui 1 will make the GUI show but it will be loaded with the options specified in the Command Line parameters.
- /fm 1
  - /fm 1 specifies that it will process the Form and Manner violations. These are only available for some of the downloaders
- /pause 1
  - /pause 1 will cause the EobrDownloader.exe to pause before closing so the output can be observed after running.
C:\Windows\RL5.ini Settings (optional):
- [Directories]
  EobLogImportRoot=C:\ProgramData\RapidLog\Data (Tip: Match this to your Data= line)
- Note: if this does not exist the downloads will go to \RapidLog\Data\EobLogImport\CompanyCode
Example BAT File for All Companies and Providers (prefered method):
- “C:\Program Files (x86)\RapidLog\DownloadRunner.exe”
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\ForEachCompany.exe” RapidLog.exe [CompanyCode] -NewAudit HC -MI
Example BAT File for a Single Company and Provider:
- “C:\Program Files (x86)\RapidLog\EobrDownloader.exe” /provider GeoSpace /companycode MYRLCOMPANY /apikey GeoSpaceapikey /daysback 8
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -L RapidLogFormat
  “C:\Program Files (x86)\RapidLog\RapidLog.exe” MYRLCOMPANY -NewAudit HC -MI

Instructions:

Add the credentials for the ELD provider on the Company->Configure Download Page in RapidLog.
Edit the Directories section in the C:\Windows\rl5.ini file by adding EobLogImportRoot=Your Data folder.
- Example: EobLogImportRoot=C:\ProgramData\RapidLog\Data
Open Notepad and setup the download, import and audit. Save that file as a .bat file.
Open Task Scheduler and schedule the .bat file to run once or twice daily.